SIGLENT’s SDG1000X is a series of dual-channel function/arbitrary waveform generators with specifications that include up to 60 MHz maximum bandwidth, 150 MSa/s sampling rate and 14-bit vertical resolution. The proprietary EasyPulse technique helps to solve the weaknesses inherent in traditional DDS generators when generating pulse waveforms, and the special square generator is capable of generating square waveforms up to 60 MHz in frequency with low jitter. With these advantages, the SDG1000X can provide users with a variety of high fidelity / low jitter signals while meeting the growing requirements of a wide range of complex and varied applications.
- Special circuit for Square wave function, can generate Square waves up to 60 MHz with jitter less than 300 ps+0.05 ppm of period
- Plenty of analog and digital modulation types: AM, DSB-AM, FM, PM, FSK, ASK, PSK and PWM
- Sweep and Burst functions
- Harmonics Generator function
- Waveform Combining function
- High precision Frequency Counter
- Standard interfaces: USB Host, USB Device (USBTMC), LAN (VXI-11)
- Optional interface: GPIB
- 4.3” TFT-LCD display
Identical dual output-channels with high performance View more
Identical dual output-channels with high performance
Capable of outputting large signals at high frequencies. dual-channels, 20 Vpp amplitude can be guaranteed at up to 10 MHz.
Low Distortion Output View more
Low Distortion Output
With 0 dBm output, the THD (Total Harmonic Distortion) is less than 0.075%. Harmonics and spurs are less than -40 dBc throughout the entire bandwidth.
Innovative EasyPulse Technology View more
Innovative EasyPulse Technology
When a Pulse waveform is generated by a common DDS generator, there will be a one-clock-jitter if the sampling rate is not an
integer-related multiple of the output frequency. SDG1000X EasyPulse technology successfully overcomes this weakness in DDS
designs and helps to produce low jitter Pulse waveforms.
The rise/fall times can be set independently to the minimum of 16.8 ns at any frequency and to the maximum of 22.4 s. The adjustment
step is as small as 100 ps. The Pulse width can be fine-tuned to the minimum of 32.6 ns with the adjustment step as small as 100ps.
High performance Square Waves View more
High performance Square Waves
Benefitting from a special square-wave generating circuitry, the Square from the SDG1000X breaks the 60 MHz bandwidth barrier,
reaching rise/fall times of less than 4.2 ns, and frequencies up to 60 MHz.
The Square wave exhibits the same excellent jitter performance as the Pulse waveform
Modulation View more
Multiple modulation types: AM, DSB-AM, FM, PM, FSK, ASK, PSK and PWM. The modulation source can be configured as “Internal” or “External”.
Burst View more
Two Burst modes, “N cycle” and “Gated”. The Burst source can be configured as “Internal”, “External” or “Manual”.
Sweep View more
Two Sweep modes, “Linear” and “Log”. Two Sweep directions, “Up” and “Down” and three Sweep sources, “Internal”, “External”
Frequency Counter View more
High precision Frequency Counter with an input frequency range of 0.1 Hz~200 MHz.
Harmonics Function View more
Up to 10 harmonics may be generated. Amplitude and phase of each harmonic can be set independently
Waveform Combining View more
Capable of combining the waveforms of 2 channels from internal, providing more flexible tools to generate complex waveforms.
Arbitrary Waveform Software EasyWave View more
Arbitrary Waveform Software EasyWave
EasyWave is a powerful arbitrary waveform editing software program that supports several ways to generate arbitrary waveform such as manual drawing, line-drawing, equation-drawing, coordinate-drawing, etc. It is quite convenient for users to edit their own arbitrary waveforms through EasyWave.
Printed Quick Start Guide (English)
Power cord designed for use with the instrument in the country of operation. Available separately. Power cord H05VV-F 3G0.75MM2-004; GB-line power line (L = 1.5m ± 20mm) three plugs; product suffix; 0.13 square; black (Ju Yu)
Rackmount kit is designed for use with only one instrument. It is compatible with the SDG800, SDG1000, SDG1000X, SDG2000X, and SDG5000 series function generators
BNC terminated coaxial cable (1 m length).
GPIB adapter converts GPIB signals to USB. For use with instruments that do not have a native GPIB bus Overview: USB-GPIB adapter is used to Siglent instrument， which has the USB Host interface but have no GPIB interface (eg SDS1000 series digital oscilloscope) . It can help this instrument connect to the device on the … Continued
20 dB Attenuator
Power Amplifier(typical); Input Impedance: 15kΩ; Input: +/- 6.5V Vpp(Gain:X1); +/- 1.3V (Gain:X10); Gain: Switching in 10V/1V and 10V/10V; Output Voltage: 25.4 Vpp; Output Current: 1.12 A; Slew Rate: ≥ 90 V/μs; Overshoot: ≤ 4%. Compatile with all SIGLENT SDG series generators.