The SDG1000 series of high-performance function/arbitrary waveform generators use direct digital synthesis (DDS) technology and can generate accurate, stable, clean and low distortion output signals. It provides fast rising and falling edge square waves up to 25MHz. The SDG1000 series provides a user-friendly graphical interface that can help you complete tasks faster and greatly improve your work efficiency. It has dual-channel output and each channel can output waveforms up to 50MHz (Sine Wave).
- Includes built-in high precision, 200 MHz frequency counter
- Multiple modulation functions, sweep-frequency function, pulse train function
- Standard PC connections: USB Device, USB Host, support U Disk storage and software, optional GPIB port
- Can seamlessly connect to the SDS1000 series digital oscilloscopes and supports remote command control
Printed Quick Start Guide (English)
Power cord designed for use with the instrument in the country of operation. Available separately. Power cord H05VV-F 3G0.75MM2-004; GB-line power line (L = 1.5m ± 20mm) three plugs; product suffix; 0.13 square; black (Ju Yu)
20 dB Attenuator
Power Amplifier(typical); Input Impedance: 15kΩ; Input: +/- 6.5V Vpp(Gain:X1); +/- 1.3V (Gain:X10); Gain: Switching in 10V/1V and 10V/10V; Output Voltage: 25.4 Vpp; Output Current: 1.12 A; Slew Rate: ≥ 90 V/μs; Overshoot: ≤ 4%. Compatile with all SIGLENT SDG series generators.
Rackmount kit is designed for use with only one instrument. It is compatible with the SDG800, SDG1000, SDG1000X, SDG2000X, and SDG5000 series function generators
BNC terminated coaxial cable (1 m length).
GPIB adapter converts GPIB signals to USB. For use with instruments that do not have a native GPIB bus Overview: USB-GPIB adapter is used to Siglent instrument， which has the USB Host interface but have no GPIB interface (eg SDS1000 series digital oscilloscope) . It can help this instrument connect to the device on the … Continued