The SIGLENT SVA1000X series spectrum & vector network analyzers are powerful and flexible tools for broadcast and RF device testing. With a wide frequency range from 9 kHz to 1.5 GHz, the analyzer delivers reliable automatic measurements and plenty of features including a tracking generator and multiple modes of operation: the base model is a swept super-heterodyne spectrum analyzer and optional functions include a vector network analyzer (S11, S21 from 10 MHz – 1.5 GHz), a Frequency Domain Reflectometry based distance-to-fault locator, and a modulation analyzer. Applications include broadcast monitoring/evaluation, site surveying, EMI pre-compliance,research and development, education, production and maintenance.
|Frequency Range||Resolution Bandwidth (RBW)||Phase Noise||Total Amplitude Accuracy||Display Average Noise Level (DANL)||Price|
|SVA1015X||9 kHz to 1.5 GHz||1 Hz to 1 MHz, in 1-3-10 sequence||< -99 dBc/Hz @ 1 GHz, 10 kHz offset||≤1.2 dB||-156 dBm/Hz, Normalized to 1 Hz (typ.)||$1395||Buy Now|
- Tracking Generator Standard
- Vector Network Analysis (Opt.)
- Distance-To-Fault (Opt.)
- Modulation Analysis (Opt.)
- EMI Pre-compliance Test Kit (Opt.)
- Advanced Measurement Kit (Opt.)
- 10.1 lnch (1024×600) Multi-Touch Screen, Mouse and Keyboard supported
- Web Browser Remote Control on PC and Mobile Terminals
Smith Chart in Vector Network Analysis Mode View more
Smith Chart in Vector Network Analysis Mode
Measure insertion (S11) and transmission (S21) as well as complex impedance and graph data in common RF formats.
Cable Fault Locator in Distance to Fault Mode View more
Cable Fault Locator in Distance to Fault Mode
Identify broken, damaged, or degraded cables quickly using the frequency domain (FDR) based DTF function.
ASK/FSK Digital Modulation Analysis Mode View more
ASK/FSK Digital Modulation Analysis Mode
Observe and demodulate ASK and FSK signals.
10.1 lnch (1024x600) Multi-Touch Screen View more
10.1 lnch (1024x600) Multi-Touch Screen
A very intuitive and easy-to-use touch screen features a shortcut screen widget, mouse, and keyboard support.
Minimum 1 Hz Resolution Bandwidth (RBW) View more
Minimum 1 Hz Resolution Bandwidth (RBW)
Easily view small frequency differences and identify possible interference sources more quickly.
-156 dBm Displayed Average Noise Level View more
-156 dBm Displayed Average Noise Level
Identify small signals, noise sources, and spurs more easily with a low noise floor.
Phase noise <-99 dBc/Hz@1 GHz, offset 10 kHz View more
Phase noise <-99 dBc/Hz@1 GHz, offset 10 kHz
Stable LO provides solid performance to easily characterize and grade transmitters and RF source performance.
EMI Precompliance Test Kit View more
EMI Precompliance Test Kit
Adds EMI filter (6 dB), FCC RBWs 200 Hz/9 kHz/120 kHz, and Quasi-peak detector for more accurate data when performing pre-compliance measurements.
ACPR in the Advanced Measurement Kit View more
ACPR in the Advanced Measurement Kit
Onscreen measurement of adjacent channel power and more with the advanced measurement kit (SVA1000X-AMK)
Spectrum Monitor in the Advanced Measurement Kit View more
Spectrum Monitor in the Advanced Measurement Kit
Adds an on-screen waterfall chart to help quickly show spectral signal changes over time.
Free EasySpectrum PC Software View more
Free EasySpectrum PC Software
Set up and run pre-compliance scans. Add/edit limit lines, antenna/cable factors, and print reports with this free software.
Web-based Remote Control View more
Web-based Remote Control
Control the SVA from your computer without adding additional software. Features the same intuitive layout as the touch-screen display.
Mechanical Calibration Kit: Open(M), Short(M), Match(M,50), Through(F-F), 50 Ω, 4 GHzLearn more
Advanced Measurement Kit adds on-screen measurements for common broadcast signal measurements.Learn more