SDS1000CML+ series is a dual-channel universal digital oscilloscope, available in 70 MHz, 100 MHz and 150 MHz bandwidth models. It includes a 2 Mpts memory depth that helps to ensure accurate waveform resolution and to capture longer signal lengths. With its 7 inch TFT-LCD (800*480) screen, there is adequate screen space to help better see and analyze waveform details. Along with a 1 GSa/s sampling rate, the SDS1000CML+ supports 32 parameters measurements and common mathematical operations to speed up complex / repetitive measurements.
- Supports Multi-language display and embedded online help
- Screensaver from 1 minute to 5 hours
- Digital filter and waveform recorder function
- Shortcut storage function key
- 7 inch TFT-LCD display with 800 * 480 resolution
- Multiple interfaces: USB Host, USB Device (USBTMC), LAN (VXI-11), Pass / Fail
Normal Memory (40 Kpts) View more
Normal Memory (40 Kpts)
Long Memory (2 Mpts) View more
Long Memory (2 Mpts)
32 parameters auto measurements and 5 parameters display View more
32 parameters auto measurements and 5 parameters display
The SDS1000CML+ support voltage, time and delay measurement types, with a total of 32 different parameters. The user is able to select five measurements to display on the screen. All measurement parameters can also be displayed simultaneously.
Zoom Function View more
Zoom can extend a partial segment of the waveform, giving the user not only an overview of the whole signal but also a detailed view of he zoomed-in segment. The Zoom feature is a convenient way to locatea specific segment of a signal while zooming in to see the details.
Pass/Fail Function View more
With easy to generate user-defined test templates, the SDS1000CML+ compares the current measured trace to the template mask trace making it suitable for long-term signal monitoring or automated production line testing.
Math Function View more
SDS1000CML+ provides 5 kinds of math operation: +, -, *, /, FFT, supporting channel waveform and FFT waveform in either split display windows or both signals appearing on the full screen.
Digital Recorder View more
The digital recorder is able to record data in real-time and without any dead time. SDS1000CML+ supply 7 M of memory for the recorder and support a USB disk.
Digital Recorder Replay View more
Digital Recorder Replay
Replaying the data for user to observe and analyze.
Embedded Online Help View more
Embedded Online Help
Supports Multi-language display and embedded online help, familiarizes the user with all the functions of in a short time.
Abundant interfaces View more
SDS1000CML+ support USB Host, USB Device (USBTMC), LAN (VXI-11), Pass/Fail
Power cord designed for use with the instrument in the country of operation. Available separately. Power cord H05VV-F 3G0.75MM2-004; GB-line power line (L = 1.5m ± 20mm) three plugs; product suffix; 0.13 square; black (Ju Yu)
Printed Quick Start Guide (English)
Standard USB cable. Also available separately.
Oscilloscope Demonstration Board. Provides standard (Sine, Square), pulse (PWM, Burst), and serial (I2C, SPI, UART, LIN, and CAN) outputs.
Click on the picture to see a listing of available accessory probes.
Add isolated inputs to your oscilloscope using passive probes. Enables floating ground differential signal analysis. Overview: The ISFE provides isolated input capabilities to any oscilloscope. Independently developed by SIGLENT, it is designed to measure signals that do not share earth ground with the oscilloscope. It is suitable for use with SIGLENT’s full range of oscilloscope products. … Continued
GPIB adapter converts GPIB signals to USB. For use with instruments that do not have a native GPIB bus Overview: USB-GPIB adapter is used to Siglent instrument， which has the USB Host interface but have no GPIB interface (eg SDS1000 series digital oscilloscope) . It can help this instrument connect to the device on the … Continued
Soft Carry Case for SDS1000DL/CNL/CML Series