SDS1000X-E Series Super Phosphor Oscilloscopes

  • 100 and 200 MHz bandwidth models
  • 2 or 4 analog channels, 16 logic/MSO optional on 4 channel only
  • Real-time sampling rate up to 1 GSa/s
  • Math co-processor speeds front panel operation
  • Waveform capture rate up to 100,000 wfm/s (normal mode), and 400,000 wfm/s (sequence mode)
  • Record length up to 14 Mpts, 1 Mpt FFT
  • On-screen Bode plot and web-browser control (standard on 4 channel only)

Product Overview

SIGLENT’s SDS1000X-E Super Phosphor Oscilloscopes are available in 100 and 200 MHz bandwidths and 2 or 4 analog channels. It has a maximum sample rate of 1 GSa/s and a standard record length of 14 Mpts. For ease-of-use, the most commonly used functions can be accessed with its user-friendly front panel design. SDS1000X-E oscilloscopes employ a new generation of SPO (Super Phosphor Oscilloscope) technology that provides excellent signal fidelity and performance. The system noise is also lower than similar products in the industry. It comes with a minimum vertical input range of 500 uV/div, an innovative digital trigger system with high sensitivity and low jitter, and a waveform capture rate of 400,000 frames/ sec (sequence mode).

SDS1000X-E digital oscilloscope also employs a 256-level intensity grading display function and a color temperature display mode not found in other models in this class. SIGLENT’s oscilloscopes support multiple powerful triggering modes including serial bus triggering. Serial decoding is free and includes IIC, SPI, UART, CAN, and LIN. History waveform recording and sequential triggering enable extended waveform recording and analysis. Another powerful addition is the new 1 Mpt FFT math function that gives the SDS1000X-E oscilloscope very high frequency resolution when observing signal spectra. The new design also includes a hardware co-processor that delivers measurements quickly and accurately. The features and performance of SIGLENT’s SDS1000X-E cannot be matched anywhere else in this price class.

 

Click “Buy Now” in the table below to see the Special Promotional Pricing.

Bandwidth Channels Real time
sampling rate
Capture rate Memory depth Price
SDS1204X-E 200 MHz 4 1 GSa/s 100000 wfm/s
(Normal Mode)
400000 wfm/s
(Sequence mode)
7 Mpts/CH (not interleave mode); 14 Mpts/CH (interleave mode) $698 Buy Now
SDS1104X-E 100 MHz 4 1 GSa/s 100000 wfm/s
(Normal Mode)
400000 wfm/s
(Sequence mode)
7 Mpts/CH (not interleave mode); 14 Mpts/CH (interleave mode) $475 Buy Now
SDS1202X-E 200 MHz 2+EXT 1 GSa/s 100000 wfm/s
(Normal Mode)
400000 wfm/s
(Sequence mode)
7 Mpts/CH (not interleave mode); 14 Mpts/CH (interleave mode) $339 Buy Now
Limited Time Offer

Buy a new 4 channel SDS1000X-E model at a reduced price, you will also receive a free SDS1000X-E-FG and SDS1000X-E-16LA activation license

Key Features

  • Intelligent trigger: Edge, Slope, Pulse Width, Window, Runt, Interval, Timeout (Dropout), and Pattern
  • Free Serial bus triggering and decoding:IIC, SPI, UART, RS232, CAN,  and LIN
  • Video triggers and supports HDTV
  • Low background noise and 500 μV / div to 10 V / div voltage scales
  • 10 types of one-button shortcuts, supports Auto Setup, Default, Cursors, Measure, Roll, History, Display/Persist, Clear Sweep, Zoom and Print
  • Segmented acquisition (Sequence) mode, dividing the maximum record length into multiple segments (up to 80,000), according to trigger conditions set by the user, with a very small dead time segment to capture the qualifying event.
  • History waveform record (History) function, the maximum recorded waveform length is 80,000 frames
  • Automatic measurement function on 38 parameters, supports Statistics, Gating measurement, Math measurement, History measurement and Ref measurement
  • 1 Mpts FFT
  • True measurement and math can use all 14 Mpts of memory
  • Preset key can be customized for user settings or factory “defaults”
  • Security Erase mode
  • Highspeed hardware based Pass/ Fail function
  • Large 7-inch TFT-LCD display with 800 * 480 resolution
  • Multiple interface types: USB Host, USB Device (USB-TMC), LAN (VXI-11), Pass / Fail, Trigger Out
  • Supports SCPI remote control commands
  • Multi-language display and embedded help
  • Browser control/onboard webpage for software free monitoring (4 channel models only)
  • Bode plotting function controls external generator (SIGLENT SDG or SAG generators, 4 channel models only)

“This is an insanely low price for a 200 Mhz oscilloscope packing in sophisticated features which are normally only found in much higher priced models.”

June 2017

Need more information? Call us now 877-515-5551

Product Characteristics

7 Inch TFT-LCD Display and 10 One-button Menus View more

7 Inch TFT-LCD Display and 10 One-button Menus

7 Inch TFT-LCD Display and 10 One-button Menus

7-inch TFT-LCD display with 800*480 resolution

Most commonly used functions are accessible using 10 different one-button operation keys: Auto Setup, Default, Cursor, Measure, Roll, History, Persist, Clear Sweep, Zoom, and Print

Record Length of Up to 14 Mpts View more

Record Length of Up to 14 Mpts

Record Length of Up to 14 Mpts

Using hardware-based Zoom technologies and record length of up to 14 Mpts, users are able to use a higher sampling rate to capture more of the signal and then quickly zoom in to focus on the area of interest.

Waveform Capture Rate Up to 400,000 wfm/s View more

Waveform Capture Rate Up to 400,000 wfm/s

Waveform Capture Rate Up to 400,000 wfm/s

With a waveform capture rate of up to 400,000 wfm/s (sequence mode), the oscilloscope can easily capture low-probability events.

256-Level Intensity Grading View more

256-Level Intensity Grading

256-Level Intensity Grading

Events that occur more frequently are brighter (intensity grading) than events that occur less often. This allows you to quickly identify spurious signals.

Color Temperature Grading View more

Color Temperature Grading

Color Temperature Grading

Event frequency is shown using different colors (temperature grading). Frequent events are warmer the color. This helps to easily identify rare events.

Serial Bus Decoding Function (Standard) View more

Serial Bus Decoding Function (Standard)

Serial Bus Decoding Function (Standard)

SDS1000X-E displays the decoding through the events list. Bus protocol information can be quickly and intuitively displayed in tabular format.

True Measurements on all data View more

True Measurements on all data

True Measurements on all data

At any one timebase, the SDS1000X-E oscilloscope can measure using all 14M sample points. This ensures the accuracy of measurements while the math co-processor decreases measurement time and increases ease-of-use.

History Waveforms (History) Mode and Segmented Acquisition (Sequence) View more

History Waveforms (History) Mode and Segmented Acquisition (Sequence)

History Waveforms (History) Mode and Segmented Acquisition (Sequence)

Playback the latest triggered events using the history function. Segmented memory zcquisition will store the waveform into multiple (up to 80,000) memory segments, each segment will store triggered waveforms and timestamp each frame.

Gate and Zoom Measurement View more

Gate and Zoom Measurement

Gate and Zoom Measurement

Through Gate and Zoom measurement, the user can specify an arbitrary interval of waveform data analysis and statistics. This helps avoid measurement errors that can be caused by invalid or extraneous data, greatly enhancing the measurements’ validity and flexibility.

1 Mpt FFT View more

1 Mpt FFT

1 Mpt FFT

The new math co-processor enables FFT analysis of incoming signals using up to 1M samples per waveform. This provides high frequency resolution with a fast refresh rate. The FFT function also supports a variety of window functions so that it can adapt to different spectral measurement needs.

High Speed Hardware-Based Pass/Fail Function View more

High Speed Hardware-Based Pass/Fail Function

High Speed Hardware-Based Pass/Fail Function

Siglent’s SDS1000X-E utilizes a hardware-based Pass/Fail function, performing up to 40,000 Pass / Fail decisions each second. Easily generate userdefined test templates provide trace mask comparison making it suitable for long-term signal monitoring or automated production line testing.

Customizable Default Key View more

Customizable Default Key

Customizable Default Key

The current parameters of oscilloscope can be preset to Default Key through the Save menu.

Complete Connectivity View more

Complete Connectivity

Complete Connectivity

SDS1000X-E supports USB Host, USB Device (USB-TMC), LAN (VXI-11),  Pass/Fail and Trigger Out.

Standard Accessories

USB Cable

USB Cable

Quick Start Guide-SDS1KX-E

100 MHz models: PP510 Probes 200 MHz models: PP215 Probes

Support and Resources

Application Notes

Comparison/Differences in SDS1000X-U and SDS1000X-E oscilloscope models

Download PDF The four-channel SIGLENT SDS1000X-E models (SDS1104X-E and SDS1204X-E models) and SDS1000X-U oscilloscopes are based on very similar digital platforms and share many features. They do have some differences that could be important for you to understand prior to selecting the proper product for your application. Here are the major differences (Note XE is … Continued

SDS FFT performance on low frequency signals

Download PDF Like many modern oscilloscopes, the SIGLENT SDS series feature FFT math functions that calculate frequency information from the acquired voltage vs. time data. FFT stands for Fast Fourier Transform, and is a common method for determining the frequency content of a time-varying signal. Converting time domain data to the frequency domain makes measuring … Continued

Power Supply Design: Load Step Response with a SIGLENT DC Electronic Load

Download PDF Building a power supply that can handle various loads without oscillating can be a challenge. Computational models and computer simulations can help get your design headed in the right direction, but physical testing is essential to proving the performance of your design. One method of quickly determining stability is to use a load … Continued
US